6128-52-1013 Oil Pump for Excavator Engine 6D155 Lubricating Oil System
Minor Diameter [Max: |
45.0 LB |
Relief Valve Setting: |
Flange Mount |
Shaft Length: |
Right Hand (CW) |
Controlled Flow Rate: |
2520VQ21A5-1DD20 |
Shaft Key: |
2.5 |
Spline Description: |
Flange |
Mounting Flange: |
3/16 in |
Shaft End Flow @ RPM: |
Standard Pilot |
PDF |
|
Product Details
Minor Diameter [Max |
45.0 LB |
Relief Valve Setting |
Flange Mount |
Shaft Length |
Right Hand (CW) |
Controlled Flow Rate |
2520VQ21A5-1DD20 |
Shaft Key |
2.5 |
Spline Description |
Flange |
Mounting Flange |
3/16 in |
Shaft End Flow @ RPM |
Standard Pilot |
Mounting |
0.875 in |
Pilot Type |
Straight w/ Key |
GPM @ 1,800 rpm, Shaft End |
2520VQ |
Cover End Flow @ RPM |
1 15/16 in |
Displacement Cover End (cu in/revolution) |
Double |
Pressure Port Size, Cover End |
Buna-N |
Weight |
2500 |
Shaft Type |
N/A |
Manufacturer Part No. |
SAE B, 2 Bolt |
Max. RPM [Max |
Single Shaft Seal |
Pressure Port Size, Shaft End |
N/A |
GPM @ 1,800 rpm, Cover End |
2700 |
Major Diameter [Max |
2500 |
Cover End Pressure [Max |
N/A |
Rotation |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Minor Diameter [Min |
N/A |
Port Orientation - Shaft End |
N/A |
Major Diameter [Min |
N/A |
Port Size |
N/A |
Shaft End RPM [Max |
N/A |
Minor Diameter |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Model No. |
2520VQ21A5-1DD20 |
Shaft End Pressure [Max |
3000 |
Port Orientation - Cover End |
3000 |
Shaft Seal Type |
7.5 |
Shaft Dia. |
31.5 |
Integral Valve Configuration |
w/o Integral Valves |
Displacement Shaft End (cu in/revolution) |
4.1 |
Port Type |
Outlet 90° CW from Inlet |
Seal Material |
3/4 in Flange |
Pump Series |
1 in Flange |
Cover End RPM [Max |
1.1 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-13569877658 |