CAT Excavator 320C S6K Engine Piston Kit 297-7795 With 102mm
| Minor Diameter: |
101.0 LB |
| Shaft Length: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Pressure Port Size, Shaft End: |
4525VQ60A17-11BB20 |
| Pressure Port Size, Cover End: |
3 1/2 |
| Integral Valve Configuration: |
Flange |
| Relief Valve Setting: |
N/A |
| Model No.: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter |
101.0 LB |
| Shaft Length |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Pressure Port Size, Shaft End |
4525VQ60A17-11BB20 |
| Pressure Port Size, Cover End |
3 1/2 |
| Integral Valve Configuration |
Flange |
| Relief Valve Setting |
N/A |
| Model No. |
Standard Pilot |
| Shaft Dia. |
1.25 in |
| GPM @ 1,800 rpm, Shaft End |
14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) |
4525VQ |
| Shaft End Pressure [Max |
1.9375 in |
| Minor Diameter [Max |
Buna-N |
| Weight |
2200 |
| Pilot Type |
1.04 in |
| Manufacturer Part No. |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Shaft Key |
12/24 |
| Mounting |
2200 |
| Displacement Cover End (cu in/revolution) |
2200 |
| Shaft End RPM [Max |
N/A |
| Spline Description |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
1.248 in |
| Seal Material |
1.247 in |
| Shaft Type |
N/A |
| Max. RPM [Max |
N/A |
| Port Orientation - Cover End |
N/A |
| Port Type |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Major Diameter [Min |
4525VQ60A17-11BB20 |
| Major Diameter [Max |
3000 |
| Minor Diameter [Min |
2500 |
| Pump Series |
25.5 |
| Port Orientation - Shaft End |
90 |
| Cover End Flow @ RPM |
w/o Integral Valves |
| Shaft Seal Type |
Outlet 45° CCW from Inlet |
| Port Size |
Outlet 90° CCW from Inlet |
| Shaft End Flow @ RPM |
1 in Flange |
| Mounting Flange |
1 1/2 in Flange |
| Controlled Flow Rate |
3.37 |
| Cover End RPM [Max |
11.8 |
Company Profile
| Worktime |
9:00-18:00(BeiJing time) |
| Phone |
86-13569877658 |