1.938 Inch | 49.225 Millimeter x 2.469 Inch | 62.7 Millimeter x 2.188 Inch | 55.575 Millimeter TIMKEN RAK1 15/16 Pillow Block Bearings
1.938 Inch | 49.225 Millimeter x 2.469 Inch | 62.7 Millimeter x 2.188 Inch | 55.575 Millimeter TIMKEN RAK1 15/16 Pillow Block Bearings Engineering Calculator 1.938 Inch | 49.225 Millimeter x 2.469 Inch | 62.7 Millimeter x 2.188 Inch | 55.575 Millimeter , Cast Iron Housing Material Timken Bearing Manufacturing Wuhan Xin Lai Fu Hydraulic Pneumatic Equipment Co., Ltd. Service . Get Your Free.
What is RAK1 15/16 bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
RAK1 15/16 |
| Max. RPM [Max: |
76.0 LB |
| Manufacturer Part No.: |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Model No.: |
3525VQ25A21-11DD20 |
| Shaft End Pressure [Max: |
3 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Relief Valve Setting: |
N/A |
| Pilot Type: |
Standard Pilot |
| PDF |
RAK1 15/16 |
Product Details
| Max. RPM [Max |
76.0 LB |
| Manufacturer Part No. |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Model No. |
3525VQ25A21-11DD20 |
| Shaft End Pressure [Max |
3 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Relief Valve Setting |
N/A |
| Pilot Type |
Standard Pilot |
| Cover End Pressure [Max |
1.25 in |
| Shaft Type |
14 Tooth Splined |
| Major Diameter [Min |
3525VQ |
| Seal Material |
1 15/16 in |
| Port Orientation - Cover End |
Buna-N |
| Integral Valve Configuration |
2500 |
| Major Diameter [Max |
1.04 in |
| Pump Series |
SAE C, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Mounting Flange |
12/24 |
| Cover End RPM [Max |
2500 |
| Weight |
2500 |
| Mounting |
N/A |
| Shaft End RPM [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Length |
1.248 in |
| Cover End Flow @ RPM |
1.247 in |
| Minor Diameter [Max |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Rotation |
N/A |
| Port Size |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
3525VQ25A21-11DD20 |
| Port Orientation - Shaft End |
3000 |
| Shaft Seal Type |
3000 |
| Minor Diameter |
31.5 |
| Displacement Shaft End (cu in/revolution) |
37.5 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
| Controlled Flow Rate |
Outlet 135° CW from Inlet |
| Shaft Key |
Outlet 90° CW from Inlet |
| Spline Description |
1 in Flange |
| Shaft Dia. |
1 1/4 in Flange |
| Minor Diameter [Min |
4.12 |
| Pressure Port Size, Shaft End |
4.98 |
Company Profile
| Worktime |
9:00-18:00(BeiJing time) |
| Phone |
86-13569877658 |