Cross reference FAG 6212-2RSR-N Single Row Ball Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | T | C | d | W | B | L | C2 |
| RW306212 | KBC | 30 mm | - | - | 15.918 mm | 23 mm | - | 79.8 mm | - |
| TAM 6212 | IKO | 74 mm | - | 20,1 kN | 62 | - | - | - | 3,4 mm |
| 1726212-2RS1 | SKF | 110 mm | - | - | 60 mm | - | 22 mm | - | - |
| TA 6212 Z | IKO | 74 mm | - | 20,1 kN | 62 | - | - | - | - |
| F-96212.1 | INA | 68 mm | 16,2 mm | - | 31 mm | - | - | - | - |
| F-216212 | INA | 42 mm | - | 20 mm | 34,5 mm | - | - | - | - |
| SS 6212 | ISB | 110 mm | - | 51,45 kN | 60 mm | - | 22 mm | - | - |
| SS 6212-2RS | ISB | 110 mm | - | 51,45 kN | 60 mm | - | 22 mm | - | - |
| SS 6212-ZZ | ISB | 110 mm | - | 51,45 kN | 60 mm | - | 22 mm | - | - |
| FBN-162120-E | NSK | 21 | - | 14.2 | 16 | - | - | - | - |
| FWF-162126 | NSK | 21 | - | 20 kN | 16 | - | - | - | - |
| FAG 6217-2RSR-NR Single Row Ball Bearings | Spline Description:35.0 LB; Port Type:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Seal Material:V2020-1F11S8S-11AA30LH; Relief Valve Setting:2; Minor Diameter:Flange; Model No.:N/A; Pilot Type:N/A; Controlled Flow Rate:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| FAG N206-E-M1 Cylindrical Roller Bearings | Port Type:35.0 LB; Port Size:Flange Mount; Pump Series:Left Hand (CCW); Shaft End Flow @ RPM:V2020-1F11S8S-11AA30LH; Shaft Length:2; Displacement Shaft End (cu in/revolution):Flange; Pressure Port Size, Shaft End:N/A; Manufacturer Part No.:N/A; Major Diameter [Max:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| FAG 6311-M-P5 Precision Ball Bearings | Pressure Port Size, Cover End:35.0 LB; Weight:Flange Mount; Model No.:Left Hand (CCW); Shaft Key:V2020-1F11S8S-11AA30LH; Seal Material:2; Port Type:Flange; Port Orientation - Shaft End:N/A; Cover End RPM [Max:N/A; Shaft Seal Type:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| FAG QJ214-N2-MPA-C4-F59 Angular Contact Ball Bearings | Rotation:35.0 LB; Model No.:Flange Mount; Weight:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:V2020-1F11S8S-11AA30LH; Shaft Seal Type:2; Minor Diameter:Flange; Shaft End RPM [Max:N/A; Shaft Length:N/A; Pressure Port Size, Shaft End:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| FAG NJ2318-E-TVP2-C3 Cylindrical Roller Bearings | Rotation:35.0 LB; Weight:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End RPM [Max:2; Cover End Flow @ RPM:Flange; Port Orientation - Shaft End:N/A; Integral Valve Configuration:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| FAG 23326-AS-M-T41A Spherical Roller Bearings | GPM @ 1,800 rpm, Cover End:35.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Mounting:V2020-1F11S8S-11AA30LH; Integral Valve Configuration:2; Shaft End Flow @ RPM:Flange; Port Size:N/A; Port Orientation - Cover End:N/A; Major Diameter [Min:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| Timken hm926749 Bearing | Shaft Type:35.0 LB; Port Size:Flange Mount; Pilot Type:Left Hand (CCW); Relief Valve Setting:V2020-1F11S8S-11AA30LH; Minor Diameter [Min:2; Displacement Shaft End (cu in/revolution):Flange; Shaft End Flow @ RPM:N/A; Major Diameter [Max:N/A; Pressure Port Size, Shaft End:0.875 in; Mounting:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| FAG 6217-C5 Single Row Ball Bearings | Manufacturer Part No.:35.0 LB; Cover End RPM [Max:Flange Mount; Seal Material:Left Hand (CCW); Model No.:V2020-1F11S8S-11AA30LH; Pilot Type:2; Shaft Seal Type:Flange; Minor Diameter [Min:N/A; Rotation:N/A; Spline Description:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| FAG NU1024-M1-C3 Cylindrical Roller Bearings | Displacement Cover End (cu in/revolution):35.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Mounting Flange:V2020-1F11S8S-11AA30LH; Pressure Port Size, Cover End:2; Port Orientation - Shaft End:Flange; Model No.:N/A; Cover End RPM [Max:N/A; Major Diameter [Max:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
| FAG QJ1040-MPA Angular Contact Ball Bearings | Shaft End RPM [Max:35.0 LB; Cover End Flow @ RPM:Flange Mount; Weight:Left Hand (CCW); Displacement Shaft End (cu in/revolution):V2020-1F11S8S-11AA30LH; Port Size:2; Major Diameter [Min:Flange; GPM @ 1,800 rpm, Cover End:N/A; Shaft End Flow @ RPM:N/A; Mounting:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S8S-11AA30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.22; |
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
FAG 6212-2RSR-N Single Row Ball Bearings Video