Cross reference FAG 63005-A-2RSR Single Row Ball Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | B | d | Noun | SKU: | Weight | UNSPSC | Weight: |
| 713630050 | FAG | - | - | - | - | - | - | - | - |
| 63005-2RS1/W64 | SKF | 1.85 Inch | 47 Millimeter | - | 0.984 Inch | 25 Millimeter | Bearing | - | 0 | 31171504 | - |
| 63005-2RS | TIMKEN | 1.85 Inch | 47 Millimeter | - | 0.984 Inch | 25 Millimeter | Bearing | - | 0.1 Kg | 31171504 | - |
| 63005-A-2RSR | FAG BEARING | 1.85 Inch | 47 Millimeter | - | 0.984 Inch | 25 Millimeter | Bearing | - | 0.101 | 31171504 | - |
| SRM063005BF18 | NICE BALL BEARING | 0.937 Inch | 23.8 Millimeter | - | 0.375 Inch | 9.525 Millimeter | Bearing | - | 0.019 | 31171504 | - |
| 63005EEC3 | NTN | 1.85 Inch | 47 Millimeter | - | 0.984 Inch | 25 Millimeter | Bearing | - | 0.11 | 31171504 | - |
| 63005-2RS-C3 | Timken | 47 mm | 16 mm | 25 mm | - | - | - | - | - |
| 63005-2rsr-fag | FAG | 47mm | 16mm | 25mm | - | 63005-2rsr-fag | - | - | 0.10 KGS |
| 630052rs-timken | Timken | 47mm | 16mm | 25mm | - | 630052rs-timken | - | - | 0.11 KGS |
| 63005-2rs1-skf | SKF | 47mm | 16mm | 25mm | - | 63005-2rs1-skf | - | - | 0.11 KGS |
| 630052rsc3-timken | Timken | 47mm | 16mm | 25mm | - | 630052rsc3-timken | - | - | 0.11 KGS |
| FAG QJ214-N2-MPA-C4-F59 Angular Contact Ball Bearings | Cover End RPM [Max:75.0 LB; Port Type:Flange Mount; Port Orientation - Shaft End:Left Hand (CCW); Minor Diameter:3520VQ30E11-11CC20-LH; Shaft Seal Type:3; Shaft Type:Flange; Shaft Length:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Integral Valve Configuration:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| FAG NJ2318-E-TVP2-C3 Cylindrical Roller Bearings | Shaft End RPM [Max:75.0 LB; Pump Series:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Shaft Dia.:3520VQ30E11-11CC20-LH; Pilot Type:3; Shaft Seal Type:Flange; Major Diameter [Max:N/A; Cover End Flow @ RPM:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| FAG QJ1040-MPA Angular Contact Ball Bearings | Port Orientation - Shaft End:75.0 LB; Cover End RPM [Max:Flange Mount; Port Type:Left Hand (CCW); Port Size:3520VQ30E11-11CC20-LH; Weight:3; Port Orientation - Cover End:Flange; Shaft Seal Type:N/A; Shaft End Pressure [Max:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Spline Description:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| FAG 6217-C5 Single Row Ball Bearings | Minor Diameter [Min:75.0 LB; Cover End RPM [Max:Flange Mount; Max. RPM [Max:Left Hand (CCW); Minor Diameter [Max:3520VQ30E11-11CC20-LH; Spline Description:3; Relief Valve Setting:Flange; Pilot Type:N/A; Port Orientation - Cover End:Standard Pilot; Port Size:1.25 in; Pump Series:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| FAG 6217-2RSR-NR Single Row Ball Bearings | Pressure Port Size, Cover End:75.0 LB; Shaft Type:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft Seal Type:3520VQ30E11-11CC20-LH; Integral Valve Configuration:3; Shaft Key:Flange; Shaft End Flow @ RPM:N/A; Port Size:Standard Pilot; Shaft End RPM [Max:1.25 in; Max. RPM [Max:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| FAG 23326-AS-M-T41A Spherical Roller Bearings | Mounting Flange:75.0 LB; Integral Valve Configuration:Flange Mount; Spline Description:Left Hand (CCW); Cover End RPM [Max:3520VQ30E11-11CC20-LH; Displacement Cover End (cu in/revolution):3; Relief Valve Setting:Flange; Major Diameter [Max:N/A; Model No.:Standard Pilot; Cover End Flow @ RPM:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| FAG 6311-M-P5 Precision Ball Bearings | GPM @ 1,800 rpm, Shaft End:75.0 LB; Shaft End RPM [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Pressure Port Size, Shaft End:3520VQ30E11-11CC20-LH; Port Size:3; Cover End RPM [Max:Flange; Shaft End Flow @ RPM:N/A; Shaft Length:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.25 in; Cover End Pressure [Max:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| FAG N206-E-M1 Cylindrical Roller Bearings | Spline Description:75.0 LB; Minor Diameter [Min:Flange Mount; Pilot Type:Left Hand (CCW); Shaft End Pressure [Max:3520VQ30E11-11CC20-LH; Shaft End Flow @ RPM:3; Max. RPM [Max:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Rotation:Standard Pilot; Mounting Flange:1.25 in; Minor Diameter [Max:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| Timken hm926749 Bearing | Integral Valve Configuration:75.0 LB; Port Size:Flange Mount; Pilot Type:Left Hand (CCW); Shaft End Pressure [Max:3520VQ30E11-11CC20-LH; Shaft Key:3; Port Orientation - Shaft End:Flange; Shaft Seal Type:N/A; Mounting Flange:Standard Pilot; Minor Diameter [Max:1.25 in; Weight:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
| FAG NU1024-M1-C3 Cylindrical Roller Bearings | Mounting:75.0 LB; Shaft Key:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3520VQ30E11-11CC20-LH; Model No.:3; Controlled Flow Rate:Flange; Major Diameter [Min:N/A; Rotation:Standard Pilot; Shaft End Pressure [Max:1.25 in; Integral Valve Configuration:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96; |
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG 63005-A-2RSR Single Row Ball Bearings Video