Cross reference FAG HS71916-C-T-P4S-UL Precision Ball Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | d | C | a | B | D2 | D1 | d2 |
| S71916 ACB/HCP4A | SKF | 110 mm | 80 mm | - | 35.1 mm | 16 mm | - | - | - |
| S71916 ACB/P4A | SKF | 110 mm | 80 mm | - | 35.1 mm | 16 mm | - | - | - |
| S71916 ACD/HCP4A | SKF | 110 mm | 80 mm | - | 30.2 mm | 16 mm | - | - | - |
| S71916 ACD/P4A | SKF | 110 mm | 80 mm | - | 30.2 mm | 16 mm | - | - | - |
| S71916 ACE/HCP4A | SKF | 110 mm | 80 mm | 21,2 kN | 32 mm | 16 mm | 103,6 mm | 100,5 mm | 86,8 mm |
| S71916 ACE/P4A | SKF | 110 mm | 80 mm | - | 32 mm | 16 mm | - | - | - |
| S71916 CB/HCP4A | SKF | 110 mm | 80 mm | - | 24.9 mm | 16 mm | - | - | - |
| S71916 CB/P4A | SKF | 110 mm | 80 mm | 15,6 kN | 24.9 mm | 16 mm | 102,2 mm | 102,2 mm | 89,2 mm |
| S71916 CD/HCP4A | SKF | 110 mm | 80 mm | - | 20.8 mm | 16 mm | - | - | - |
| S71916 CD/P4A | SKF | 110 mm | 80 mm | 36,4 kN | 20.8 mm | 16 mm | 103,7 mm | 100,8 mm | 89,2 mm |
| S71916 CE/HCP4A | SKF | 110 mm | 80 mm | - | 21.7 mm | 16 mm | - | - | - |
| FAG QJ1040-MPA Angular Contact Ball Bearings | Displacement Cover End (cu in/revolution):30.0 LB; Cover End Flow @ RPM:Flange Mount; Major Diameter [Max:Right Hand (CW); Port Type:V2010-1F13S6S-11CA12; Pilot Type:1 1/2; Shaft Type:Flange; Major Diameter [Min:N/A; Cover End RPM [Max:N/A; Minor Diameter:0.875 in; Pump Series:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| FAG 6217-C5 Single Row Ball Bearings | Mounting:30.0 LB; Mounting Flange:Flange Mount; Shaft Dia.:Right Hand (CW); Relief Valve Setting:V2010-1F13S6S-11CA12; Manufacturer Part No.:1 1/2; Max. RPM [Max:Flange; Seal Material:N/A; GPM @ 1,800 rpm, Shaft End:N/A; Shaft End Flow @ RPM:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| FAG 6217-2RSR-NR Single Row Ball Bearings | Shaft End Pressure [Max:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Pilot Type:V2010-1F13S6S-11CA12; Mounting:1 1/2; Spline Description:Flange; Shaft Length:N/A; Shaft End Flow @ RPM:N/A; Major Diameter [Min:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| Timken hm926749 Bearing | Displacement Cover End (cu in/revolution):30.0 LB; Mounting:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Minor Diameter:V2010-1F13S6S-11CA12; Major Diameter [Min:1 1/2; Model No.:Flange; Pilot Type:N/A; Rotation:N/A; Relief Valve Setting:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| FAG N206-E-M1 Cylindrical Roller Bearings | Major Diameter [Min:30.0 LB; Integral Valve Configuration:Flange Mount; Minor Diameter [Min:Right Hand (CW); Shaft Length:V2010-1F13S6S-11CA12; Port Type:1 1/2; Pressure Port Size, Shaft End:Flange; Max. RPM [Max:N/A; Shaft End Pressure [Max:N/A; Displacement Cover End (cu in/revolution):0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| FAG 23326-AS-M-T41A Spherical Roller Bearings | Pressure Port Size, Shaft End:30.0 LB; Cover End RPM [Max:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2010-1F13S6S-11CA12; Rotation:1 1/2; Integral Valve Configuration:Flange; Displacement Cover End (cu in/revolution):N/A; Pressure Port Size, Cover End:N/A; Model No.:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| FAG NJ2318-E-TVP2-C3 Cylindrical Roller Bearings | Displacement Cover End (cu in/revolution):30.0 LB; Pump Series:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Major Diameter [Max:V2010-1F13S6S-11CA12; Minor Diameter:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Mounting:N/A; Major Diameter [Min:N/A; Pressure Port Size, Shaft End:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| FAG NU1024-M1-C3 Cylindrical Roller Bearings | Port Orientation - Cover End:30.0 LB; Max. RPM [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); GPM @ 1,800 rpm, Cover End:V2010-1F13S6S-11CA12; Cover End Pressure [Max:1 1/2; Shaft Seal Type:Flange; Weight:N/A; Port Orientation - Shaft End:N/A; Pilot Type:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| FAG 6311-M-P5 Precision Ball Bearings | Integral Valve Configuration:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Model No.:Right Hand (CW); Port Type:V2010-1F13S6S-11CA12; Rotation:1 1/2; Max. RPM [Max:Flange; GPM @ 1,800 rpm, Cover End:N/A; Major Diameter [Max:N/A; Manufacturer Part No.:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| FAG QJ214-N2-MPA-C4-F59 Angular Contact Ball Bearings | Shaft Dia.:30.0 LB; Controlled Flow Rate:Flange Mount; Seal Material:Right Hand (CW); Model No.:V2010-1F13S6S-11CA12; Relief Valve Setting:1 1/2; Mounting Flange:Flange; Spline Description:N/A; Displacement Cover End (cu in/revolution):N/A; Minor Diameter [Max:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG HS71916-C-T-P4S-UL Precision Ball Bearings Video