Cross reference FAG 61984-M-P65 Precision Ball Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | d | B | C | C0 | Size | Noun | Width |
| 61984 | Loyal | 560 mm | 420 mm | 65 mm | 340 kN | 560 kN | 420x560x65 | - | 65 |
| 61984 MA | ISB | 560 mm | 420 mm | 65 mm | 344 kN | 589 kN | 420x560x65 | - | 65 |
| 61984-MA | NKE | 560 mm | 420 mm | 65 mm | 352 kN | 586 kN | 420x560x65 | - | 65 |
| 61984M | BEARINGS LIMITED | - | - | - | - | - | - | - | - |
| 61984-M | SCHEERER BEARING | - | - | - | - | - | - | - | - |
| 61984 MA/C3 | SKF | 22.047 Inch | 560 Millimeter | 16.535 Inch | 420 Millimeter | - | - | - | - | Bearing | - |
| 361984 DA | SKF | 2.638 Inch | 67 Millimeter | 1.378 Inch | 35 Millimeter | - | - | - | - | Bearing | - |
| 61984-P5 | FAG BEARING | 22.047 Inch | 560 Millimeter | 16.535 Inch | 420 Millimeter | 2.559 Inch | 65 Millimeter | - | - | - | Bearing | - |
| 61984-M-C3 | FAG BEARING | 22.047 Inch | 560 Millimeter | 16.535 Inch | 420 Millimeter | - | - | - | - | Bearing | - |
| 61984-M-P5 | FAG BEARING | 22.047 Inch | 560 Millimeter | 16.535 Inch | 420 Millimeter | 2.559 Inch | 65 Millimeter | - | - | - | Bearing | - |
| 61984-M-P65 | FAG BEARING | 22.047 Inch | 560 Millimeter | 16.535 Inch | 420 Millimeter | 2.559 Inch | 65 Millimeter | - | - | - | Bearing | - |
| FAG N206-E-M1 Cylindrical Roller Bearings | Port Type:101.0 LB; Cover End Pressure [Max:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Port Orientation - Shaft End:4525VQ42A21-11AA20-LH; Major Diameter [Max:3 1/2; Displacement Shaft End (cu in/revolution):Flange; Shaft Key:N/A; Minor Diameter [Min:Standard Pilot; Pump Series:1.25 in; Displacement Cover End (cu in/revolution):14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| FAG 6311-M-P5 Precision Ball Bearings | Major Diameter [Max:101.0 LB; Manufacturer Part No.:Flange Mount; Mounting Flange:Left Hand (CCW); Relief Valve Setting:4525VQ42A21-11AA20-LH; Model No.:3 1/2; Shaft Dia.:Flange; Shaft Seal Type:N/A; Shaft Key:Standard Pilot; Minor Diameter [Max:1.25 in; Mounting:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| FAG 6217-2RSR-NR Single Row Ball Bearings | Shaft End Flow @ RPM:101.0 LB; Relief Valve Setting:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Mounting Flange:4525VQ42A21-11AA20-LH; Shaft Type:3 1/2; Spline Description:Flange; Mounting:N/A; Shaft Seal Type:Standard Pilot; Minor Diameter:1.25 in; Manufacturer Part No.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| FAG 6217-C5 Single Row Ball Bearings | Port Orientation - Cover End:101.0 LB; Spline Description:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Weight:4525VQ42A21-11AA20-LH; Shaft End Pressure [Max:3 1/2; Major Diameter [Min:Flange; Cover End Pressure [Max:N/A; Controlled Flow Rate:Standard Pilot; Shaft Seal Type:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| Timken hm926749 Bearing | Minor Diameter:101.0 LB; Major Diameter [Max:Flange Mount; Major Diameter [Min:Left Hand (CCW); Port Orientation - Cover End:4525VQ42A21-11AA20-LH; Minor Diameter [Max:3 1/2; Seal Material:Flange; Displacement Shaft End (cu in/revolution):N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Integral Valve Configuration:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| FAG 23326-AS-M-T41A Spherical Roller Bearings | Max. RPM [Max:101.0 LB; Minor Diameter [Max:Flange Mount; Model No.:Left Hand (CCW); Shaft End RPM [Max:4525VQ42A21-11AA20-LH; Shaft Dia.:3 1/2; Mounting Flange:Flange; Cover End Pressure [Max:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Minor Diameter:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| FAG QJ214-N2-MPA-C4-F59 Angular Contact Ball Bearings | Pump Series:101.0 LB; Integral Valve Configuration:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Pressure Port Size, Cover End:4525VQ42A21-11AA20-LH; Mounting:3 1/2; Major Diameter [Max:Flange; Relief Valve Setting:N/A; Cover End Pressure [Max:Standard Pilot; Port Type:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| FAG NU1024-M1-C3 Cylindrical Roller Bearings | Pilot Type:101.0 LB; Shaft Length:Flange Mount; Pump Series:Left Hand (CCW); Cover End Pressure [Max:4525VQ42A21-11AA20-LH; Integral Valve Configuration:3 1/2; Mounting Flange:Flange; Displacement Shaft End (cu in/revolution):N/A; Minor Diameter [Min:Standard Pilot; Max. RPM [Max:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| FAG NJ2318-E-TVP2-C3 Cylindrical Roller Bearings | Cover End Pressure [Max:101.0 LB; Shaft Dia.:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Manufacturer Part No.:4525VQ42A21-11AA20-LH; Spline Description:3 1/2; Relief Valve Setting:Flange; Mounting:N/A; Shaft Seal Type:Standard Pilot; Major Diameter [Max:1.25 in; Pressure Port Size, Shaft End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
| FAG QJ1040-MPA Angular Contact Ball Bearings | Pilot Type:101.0 LB; Weight:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Minor Diameter:4525VQ42A21-11AA20-LH; Max. RPM [Max:3 1/2; Pressure Port Size, Shaft End:Flange; Port Size:N/A; Cover End RPM [Max:Standard Pilot; Minor Diameter [Min:1.25 in; Major Diameter [Min:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46; |
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
FAG 61984-M-P65 Precision Ball Bearings Video