Cross reference Timken hm926749 Bearing | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | C | R | a | r | B | T | D |
T-HH926749/HH926710 | NTN | 120,65 mm | 53,975 mm | - | - | - | 82,55 mm | 82,55 mm | 273,05 mm |
HM926749/10 | ISO | 127,792 mm | 53,975 mm | - | 13,5 mm | - | 49,428 mm | 53,975 mm | 228,6 mm |
HM926749/HM926710 | Timken | 127,792 mm | 38,1 mm | 3,6 mm | 13,5 mm | 3,3 mm | 49,428 mm | 53,975 mm | 228,6 mm |
HM926749/HM926710D+HM926749XE | Timken | 127,792 mm | 84,138 mm | 3,5 mm | - | 2,3 mm | - | 115,888 mm | 228,6 mm |
HH926749/HH926710 | NSK | 120,65 mm | 685 kN | 6,4 mm | 77 mm | 6,4 mm | 82,55 mm | 82,55 mm | 273,05 mm |
HH926749/HH926716 | NSK | 120,65 mm | 685 kN | 6,4 mm | 77 mm | 6,4 mm | 82,55 mm | 82,55 mm | 279,4 mm |
HH926749/10 | Loyal | 120,65 mm | 832 kN | - | 6,6 mm | - | 82,55 mm | 82,55 mm | 273,05 mm |
HM926749-90031 | TIMKEN | 5.031 Inch | 127.787 Millimeter | - | - | - | - | - | - | 9 Inch | 228.6 Millimeter |
HM926749-90080 | TIMKEN | 5.031 Inch | 127.787 Millimeter | - | - | - | - | - | - | 9 Inch | 228.6 Millimeter |
HH926749-2 | TIMKEN | 4.75 Inch | 120.65 Millimeter | - | - | - | - | 3.25 Inch | 82.55 Millimeter | - | 0 Inch | 0 Millimeter |
HH926749-90016 | TIMKEN | 4.75 Inch | 120.65 Millimeter | - | - | - | - | - | - | 10.75 Inch | 273.05 Millimeter |
FAG NU1024-M1-C3 Cylindrical Roller Bearings | Weight:76.0 LB; Mounting Flange:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Mounting:3525VQ38A14-11AA20; Displacement Cover End (cu in/revolution):3; Seal Material:Flange; Pump Series:N/A; Spline Description:Standard Pilot; Shaft Length:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
FAG NJ2318-E-TVP2-C3 Cylindrical Roller Bearings | Mounting:76.0 LB; Shaft End RPM [Max:Flange Mount; Port Size:Right Hand (CW); Shaft Key:3525VQ38A14-11AA20; Minor Diameter [Max:3; Cover End Flow @ RPM:Flange; Shaft Seal Type:N/A; Pressure Port Size, Shaft End:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
FAG N206-E-M1 Cylindrical Roller Bearings | Manufacturer Part No.:76.0 LB; Max. RPM [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Minor Diameter [Min:3525VQ38A14-11AA20; Shaft Type:3; Pump Series:Flange; Displacement Shaft End (cu in/revolution):N/A; Shaft Seal Type:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
FAG 23326-AS-M-T41A Spherical Roller Bearings | Spline Description:76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Model No.:Right Hand (CW); Displacement Shaft End (cu in/revolution):3525VQ38A14-11AA20; Controlled Flow Rate:3; Shaft End RPM [Max:Flange; Pressure Port Size, Shaft End:N/A; Shaft End Pressure [Max:Standard Pilot; Rotation:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
FAG 6217-2RSR-NR Single Row Ball Bearings | Pump Series:76.0 LB; Shaft End Pressure [Max:Flange Mount; Rotation:Right Hand (CW); GPM @ 1,800 rpm, Cover End:3525VQ38A14-11AA20; Displacement Shaft End (cu in/revolution):3; Mounting:Flange; Shaft End Flow @ RPM:N/A; Shaft Seal Type:Standard Pilot; Cover End RPM [Max:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
FAG QJ1040-MPA Angular Contact Ball Bearings | Cover End Pressure [Max:76.0 LB; Shaft Dia.:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Port Orientation - Cover End:3525VQ38A14-11AA20; Pump Series:3; Port Orientation - Shaft End:Flange; Major Diameter [Min:N/A; Shaft End RPM [Max:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Max. RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
FAG 6217-C5 Single Row Ball Bearings | Displacement Shaft End (cu in/revolution):76.0 LB; Shaft End RPM [Max:Flange Mount; Major Diameter [Min:Right Hand (CW); Rotation:3525VQ38A14-11AA20; Major Diameter [Max:3; Pump Series:Flange; Manufacturer Part No.:N/A; Minor Diameter [Min:Standard Pilot; Weight:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
FAG QJ214-N2-MPA-C4-F59 Angular Contact Ball Bearings | Pressure Port Size, Shaft End:76.0 LB; Controlled Flow Rate:Flange Mount; Mounting:Right Hand (CW); Shaft Seal Type:3525VQ38A14-11AA20; Mounting Flange:3; Minor Diameter [Max:Flange; Model No.:N/A; Port Size:Standard Pilot; Pilot Type:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
FAG 6311-M-P5 Precision Ball Bearings | Relief Valve Setting:76.0 LB; Rotation:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Manufacturer Part No.:3525VQ38A14-11AA20; Model No.:3; Port Type:Flange; Cover End Flow @ RPM:N/A; Weight:Standard Pilot; Minor Diameter [Min:1.25 in; Spline Description:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A14-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):7.4; |
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
Timken hm926749 Bearing Video