Cross reference 1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | T | d | H | R | B | E | G | C |
| YSPAG 206-103 | SKF | - | 30.162 mm | - | - | - | - | - | 18 mm |
| 20TP103 | Timken | 34,925 mm | 50,8 mm | 141,3 mm | - | - | 61,9 mm | - | - |
| 20TPS103 | Timken | - | 50,8 mm | 141,3 mm | 190,5 mm | - | 85,7 mm | - | 46,038 mm |
| 5103 | Ruville | - | - | - | - | - | - | - | - |
| 1103KL | Timken | - | 30,1625 mm | - | - | 36,51 mm | - | 18,26 mm | 21,8 kN |
| 1103KL3 | Timken | - | 31.75 mm | - | - | 36,51 mm | - | 18,26 mm | 21,8 kN |
| 1103KLB | Timken | - | 30,1625 mm | - | - | 36,51 mm | - | 18,26 mm | 21,8 kN |
| 1103KLL | Timken | - | 30,1625 mm | - | - | 36,51 mm | - | 18,26 mm | 21,8 kN |
| 1103KLL3 | Timken | - | 31.75 mm | - | - | 36,51 mm | - | 18,26 mm | 21,8 kN |
| 1103KLLB | Timken | - | 30,1625 mm | - | - | 36,51 mm | - | 18,26 mm | 21,8 kN |
| 1103KLLB3 | Timken | - | 31.75 mm | - | - | 36,51 mm | - | 18,26 mm | 21,8 kN |
| DODGE FB-SC-104S-NL Flange Block Bearings | Weight:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Max. RPM [Max:Left Hand (CCW); Controlled Flow Rate:3525VQ38A21-11AA20-LH; Shaft End Flow @ RPM:3; Shaft End Pressure [Max:Flange; Manufacturer Part No.:N/A; Cover End Flow @ RPM:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Port Size:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| DODGE WSTU-SC-010 Take Up Unit Bearings | GPM @ 1,800 rpm, Shaft End:76.0 LB; Integral Valve Configuration:Flange Mount; Shaft Dia.:Left Hand (CCW); Weight:3525VQ38A21-11AA20-LH; Pump Series:3; Shaft End Pressure [Max:Flange; Minor Diameter [Min:N/A; Controlled Flow Rate:Standard Pilot; Relief Valve Setting:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| 3 Inch | 76.2 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE EP2B-IP-300LE Pillow Block Bearings | Cover End Pressure [Max:76.0 LB; Shaft Length:Flange Mount; Mounting Flange:Left Hand (CCW); Shaft Dia.:3525VQ38A21-11AA20-LH; Controlled Flow Rate:3; GPM @ 1,800 rpm, Cover End:Flange; Pressure Port Size, Cover End:N/A; Manufacturer Part No.:Standard Pilot; Pump Series:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| DODGE INS-S2-111R Insert Bearings Spherical OD | Shaft End Flow @ RPM:76.0 LB; Minor Diameter:Flange Mount; Shaft Length:Left Hand (CCW); Seal Material:3525VQ38A21-11AA20-LH; Minor Diameter [Max:3; Spline Description:Flange; Shaft Key:N/A; Mounting Flange:Standard Pilot; Manufacturer Part No.:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| 2.688 Inch | 68.275 Millimeter x 5.75 Inch | 146.05 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-SD-211 Pillow Block Bearings | Mounting Flange:76.0 LB; Pilot Type:Flange Mount; Pump Series:Left Hand (CCW); Shaft Key:3525VQ38A21-11AA20-LH; Cover End RPM [Max:3; Displacement Cover End (cu in/revolution):Flange; Minor Diameter [Min:N/A; Port Type:Standard Pilot; Port Orientation - Cover End:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| 1.438 Inch | 36.525 Millimeter x 2.547 Inch | 64.694 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-K-107R Pillow Block Bearings | Max. RPM [Max:76.0 LB; Cover End Pressure [Max:Flange Mount; Major Diameter [Min:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3525VQ38A21-11AA20-LH; Pressure Port Size, Cover End:3; Minor Diameter [Min:Flange; Shaft End Flow @ RPM:N/A; Pilot Type:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Port Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| DODGE FB-DL-012 Flange Block Bearings | Manufacturer Part No.:76.0 LB; Mounting Flange:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft Type:3525VQ38A21-11AA20-LH; Shaft Key:3; Minor Diameter:Flange; Max. RPM [Max:N/A; Model No.:Standard Pilot; Minor Diameter [Min:1.25 in; Rotation:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| DODGE FC-SCM-208 Flange Block Bearings | Minor Diameter:76.0 LB; Port Size:Flange Mount; Relief Valve Setting:Left Hand (CCW); Max. RPM [Max:3525VQ38A21-11AA20-LH; Manufacturer Part No.:3; Controlled Flow Rate:Flange; Shaft Type:N/A; Shaft End RPM [Max:Standard Pilot; Cover End RPM [Max:1.25 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| 4 Inch | 101.6 Millimeter x 4.703 Inch | 119.456 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE SP2B-IP-400RE Pillow Block Bearings | Cover End Pressure [Max:76.0 LB; Pilot Type:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Spline Description:3525VQ38A21-11AA20-LH; Major Diameter [Min:3; Major Diameter [Max:Flange; Port Orientation - Shaft End:N/A; Port Size:Standard Pilot; Minor Diameter [Max:1.25 in; Model No.:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
| DODGE EFC-IP-108LE Flange Block Bearings | Shaft Seal Type:76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Seal Material:Left Hand (CCW); Rotation:3525VQ38A21-11AA20-LH; Cover End RPM [Max:3; Relief Valve Setting:Flange; Pilot Type:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Shaft Key:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4; |
Mounted Bearings
For more than 120 years, Dodge has been one of the leading suppliers of power transmission products and system components in the world. Today we utilize
Dodge - P2BE207R - Motion Industries
Dodge P2BE207R. Pillow Block Roller Bearing Unit - 2.4375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion
Mounted Ball Bearings
Dodge mounted ball bearings are available in any of our proven locking devices: our exclusive 65° set screw locking system, eccentric locking collars, D-Lok™
Dodge
Dodge Product Offering. Mounted Bearings · Mounted Ball Bearings ... Hardy Pro-Air provides success with Dodge Raptor couplings. Hardy Pro-Air Systems
Mounted bearings | ABB
Fully assembled bearing ready for industrial use. Dodge® bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings,
1.188 Inch | 30.175 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-SCUEZ-103-PCR Pillow Block Bearings Video