China Eaton Char-lynn BMT OMT Gerotor Orbit Hydraulic Motor for Concrete Mixer
| Shaft Key: |
35.0 LB |
| Shaft Dia.: |
Flange Mount |
| Major Diameter [Max: |
Right Hand (CW) |
| Cover End RPM [Max: |
V2020-1F9S9S-11DD30 |
| Displacement Cover End (cu in/revolution): |
2 |
| Integral Valve Configuration: |
Flange |
| Port Orientation - Shaft End: |
N/A |
| Minor Diameter [Min: |
N/A |
| PDF |
|
Product Details
| Shaft Key |
35.0 LB |
| Shaft Dia. |
Flange Mount |
| Major Diameter [Max |
Right Hand (CW) |
| Cover End RPM [Max |
V2020-1F9S9S-11DD30 |
| Displacement Cover End (cu in/revolution) |
2 |
| Integral Valve Configuration |
Flange |
| Port Orientation - Shaft End |
N/A |
| Minor Diameter [Min |
N/A |
| Shaft End Pressure [Max |
0.875 in |
| GPM @ 1,800 rpm, Shaft End |
13 Tooth Splined |
| Mounting |
V2020 |
| Pilot Type |
1 5/16 in |
| Weight |
Buna-N |
| Mounting Flange |
2800 |
| Shaft Seal Type |
0.728 in |
| Pressure Port Size, Shaft End |
SAE B, 2 Bolt |
| Port Orientation - Cover End |
Single Shaft Seal |
| Max. RPM [Max |
16/32 |
| Controlled Flow Rate |
2800 |
| Displacement Shaft End (cu in/revolution) |
2800 |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Relief Valve Setting |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Minor Diameter |
0.873 in |
| Manufacturer Part No. |
0.872 in |
| Model No. |
0.7335 in |
| Pump Series |
0.7225 in |
| Shaft End Flow @ RPM |
N/A |
| Seal Material |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Port Size |
V2020-1F9S9S-11DD30 |
| Rotation |
2500 |
| Shaft End RPM [Max |
2500 |
| Major Diameter [Min |
13.5 |
| Shaft Length |
13.5 |
| Minor Diameter [Max |
N/A |
| Cover End Pressure [Max |
Outlet 90° CW from Inlet |
| Shaft Type |
Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End |
3/4 in SAE O-Ring |
| Port Type |
3/4 in SAE O-Ring |
| Cover End Flow @ RPM |
1.81 |
| Spline Description |
1.81 |
Company Profile
| Worktime |
9:00-18:00(BeiJing time) |
| Phone |
86-13569877658 |