| Cover End Pressure [Max | 76.0 LB |
| Cover End RPM [Max | Flange Mount |
| Port Orientation - Cover End | Right Hand (CW) |
| Shaft End RPM [Max | 3525VQ30A21-11BB20 |
| Manufacturer Part No. | 3 |
| Max. RPM [Max | Flange |
| Major Diameter [Min | N/A |
| Weight | Standard Pilot |
| Seal Material | 1.25 in |
| Shaft Dia. | 14 Tooth Splined |
| Model No. | 3525VQ |
| Shaft Seal Type | 1 15/16 in |
| Mounting Flange | Buna-N |
| Shaft End Flow @ RPM | 2500 |
| Integral Valve Configuration | 1.04 in |
| GPM @ 1,800 rpm, Cover End | SAE C, 2 Bolt |
| Minor Diameter | Single Shaft Seal |
| Port Orientation - Shaft End | 12/24 |
| Relief Valve Setting | 2500 |
| Pilot Type | 2500 |
| Shaft Length | N/A |
| Shaft Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 1.248 in |
| Cover End Flow @ RPM | 1.247 in |
| Shaft End Pressure [Max | N/A |
| Port Type | N/A |
| Shaft Key | N/A |
| Port Size | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Controlled Flow Rate | 3525VQ30A21-11BB20 |
| Pressure Port Size, Cover End | 3000 |
| Mounting | 3000 |
| Major Diameter [Max | 31.5 |
| Pressure Port Size, Shaft End | 45 |
| Spline Description | w/o Integral Valves |
| Rotation | Outlet 45° CCW from Inlet |
| Pump Series | Outlet 90° CCW from Inlet |
| Minor Diameter [Max | 1 in Flange |
| Displacement Shaft End (cu in/revolution) | 1 1/4 in Flange |
| Minor Diameter [Min | 4.12 |
| GPM @ 1,800 rpm, Shaft End | 5.96 |
