Hydstar sell D2366 Engine Water Pump 65.06500-6125 for Doosan DH280-3
Shaft Seal Type: | 45.0 LB |
Shaft End Pressure [Max: | Flange Mount |
Integral Valve Configuration: | Right Hand (CW) |
Major Diameter [Max: | 2520VQ21A8-11AA20 |
Port Type: | 2 1/2 |
Port Size: | Flange |
Shaft Length: | N/A |
Shaft End Flow @ RPM: | Standard Pilot |
PDF |
|
Product Details
Shaft Seal Type | 45.0 LB |
Shaft End Pressure [Max | Flange Mount |
Integral Valve Configuration | Right Hand (CW) |
Major Diameter [Max | 2520VQ21A8-11AA20 |
Port Type | 2 1/2 |
Port Size | Flange |
Shaft Length | N/A |
Shaft End Flow @ RPM | Standard Pilot |
Pilot Type | 0.875 in |
Spline Description | 13 Tooth Splined |
Cover End Pressure [Max | 2520VQ |
GPM @ 1,800 rpm, Cover End | 1 3/8 in |
Displacement Cover End (cu in/revolution) | Buna-N |
Port Orientation - Shaft End | 2500 |
Max. RPM [Max | 0.715 in |
Manufacturer Part No. | SAE B, 2 Bolt |
GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
Shaft End RPM [Max | 16/32 |
Cover End RPM [Max | 2700 |
Relief Valve Setting | 2500 |
Rotation | N/A |
Shaft Key | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Port Orientation - Cover End | 0.873 in |
Shaft Type | 0.872 in |
Minor Diameter [Max | N/A |
Pressure Port Size, Shaft End | N/A |
Minor Diameter | N/A |
Cover End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Mounting Flange | 2520VQ21A8-11AA20 |
Mounting | 3000 |
Displacement Shaft End (cu in/revolution) | 3000 |
Minor Diameter [Min | 12 |
Controlled Flow Rate | 31.5 |
Major Diameter [Min | w/o Integral Valves |
Shaft Dia. | Outlet 135° CCW from Inlet |
Model No. | Outlet Opposite Inlet |
Pump Series | 3/4 in Flange |
Pressure Port Size, Cover End | 1 in Flange |
Seal Material | 1.67 |
Weight | 4.12 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-13569877658 |