20V/25V/35V/45V Hydraulic Vane Pump Drive Shaft Oil Seal
Cover End Flow @ RPM: | 45.0 LB |
Mounting: | Flange Mount |
Shaft End RPM [Max: | Right Hand (CW) |
Mounting Flange: | 2520VQ12A5-11DD20 |
Rotation: | 2 1/2 |
Max. RPM [Max: | Flange |
Spline Description: | N/A |
GPM @ 1,800 rpm, Shaft End: | Standard Pilot |
PDF |
|
Product Details
Cover End Flow @ RPM | 45.0 LB |
Mounting | Flange Mount |
Shaft End RPM [Max | Right Hand (CW) |
Mounting Flange | 2520VQ12A5-11DD20 |
Rotation | 2 1/2 |
Max. RPM [Max | Flange |
Spline Description | N/A |
GPM @ 1,800 rpm, Shaft End | Standard Pilot |
Minor Diameter [Min | 0.875 in |
Pressure Port Size, Shaft End | 13 Tooth Splined |
Cover End Pressure [Max | 2520VQ |
Minor Diameter [Max | 1 3/8 in |
Shaft Dia. | Buna-N |
Model No. | 2700 |
Shaft Type | 0.715 in |
Shaft End Flow @ RPM | SAE B, 2 Bolt |
Pump Series | Single Shaft Seal |
Integral Valve Configuration | 16/32 |
Pilot Type | 2700 |
Minor Diameter | 2700 |
Shaft End Pressure [Max | N/A |
Shaft Length | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Controlled Flow Rate | 0.873 in |
GPM @ 1,800 rpm, Cover End | 0.872 in |
Displacement Shaft End (cu in/revolution) | N/A |
Shaft Key | N/A |
Major Diameter [Min | N/A |
Shaft Seal Type | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Weight | 2520VQ12A5-11DD20 |
Port Size | 3000 |
Seal Material | 3000 |
Port Type | 7.5 |
Major Diameter [Max | 18 |
Port Orientation - Shaft End | w/o Integral Valves |
Port Orientation - Cover End | Outlet 135° CW from Inlet |
Cover End RPM [Max | Outlet 90° CW from Inlet |
Relief Valve Setting | 3/4 in Flange |
Displacement Cover End (cu in/revolution) | 1 in Flange |
Manufacturer Part No. | 1.1 |
Pressure Port Size, Cover End | 2.45 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-13569877658 |