Dump Truck Lifting Hydraulic Gear Pump KP1403A
Shaft Seal Type: | 30.0 LB |
Seal Material: | Flange Mount |
Controlled Flow Rate: | Right Hand (CW) |
Minor Diameter [Max: | V2010-1F7S7S-1DD12 |
Max. RPM [Max: | 1 1/2 |
Port Orientation - Shaft End: | Flange |
Port Orientation - Cover End: | 3/16 in |
Major Diameter [Max: | N/A |
Product Details
Shaft Seal Type | 30.0 LB |
Seal Material | Flange Mount |
Controlled Flow Rate | Right Hand (CW) |
Minor Diameter [Max | V2010-1F7S7S-1DD12 |
Max. RPM [Max | 1 1/2 |
Port Orientation - Shaft End | Flange |
Port Orientation - Cover End | 3/16 in |
Major Diameter [Max | N/A |
Spline Description | 0.875 in |
Shaft Type | Straight w/ Key |
Integral Valve Configuration | V2010 |
Pressure Port Size, Shaft End | 2 5/16 in |
Rotation | Buna-N |
Model No. | 3000 |
Minor Diameter [Min | N/A |
Minor Diameter | SAE B, 2 Bolt |
Mounting Flange | Single Shaft Seal |
Shaft End Flow @ RPM | N/A |
Shaft End RPM [Max | 2800 |
Manufacturer Part No. | 3000 |
Cover End Pressure [Max | N/A |
Shaft Dia. | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | N/A |
Port Size | N/A |
Pressure Port Size, Cover End | N/A |
Major Diameter [Min | N/A |
Weight | N/A |
Cover End Flow @ RPM | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Mounting | V2010-1F7S7S-1DD12 |
Shaft Key | 2000 |
Shaft End Pressure [Max | 2500 |
Relief Valve Setting | 10.5 |
Pump Series | 10.5 |
Port Type | N/A |
Pilot Type | Outlet 135° CW from Inlet |
Displacement Shaft End (cu in/revolution) | Outlet 90° CW from Inlet |
Shaft Length | 1/2 in SAE O-Ring |
Displacement Cover End (cu in/revolution) | 3/4 in SAE O-Ring |
GPM @ 1,800 rpm, Cover End | 1.39 |
Cover End RPM [Max | 1.39 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-13569877658 |