6127-61-1008 Japan bulldozer D355C1 engine part SA6D155 water pump
Minor Diameter [Min: | 101.0 LB |
Port Size: | Flange Mount |
Shaft Length: | Right Hand (CW) |
Shaft End Flow @ RPM: | 4525VQ60A17-11BB20 |
Port Type: | 3 1/2 |
Minor Diameter: | Flange |
Shaft Seal Type: | N/A |
Max. RPM [Max: | Standard Pilot |
PDF |
|
Product Details
Minor Diameter [Min | 101.0 LB |
Port Size | Flange Mount |
Shaft Length | Right Hand (CW) |
Shaft End Flow @ RPM | 4525VQ60A17-11BB20 |
Port Type | 3 1/2 |
Minor Diameter | Flange |
Shaft Seal Type | N/A |
Max. RPM [Max | Standard Pilot |
Displacement Cover End (cu in/revolution) | 1.25 in |
Manufacturer Part No. | 14 Tooth Splined |
GPM @ 1,800 rpm, Cover End | 4525VQ |
Pilot Type | 1.9375 in |
Controlled Flow Rate | Buna-N |
Pressure Port Size, Shaft End | 2200 |
Shaft End RPM [Max | 1.04 in |
Pump Series | SAE C, 2 Bolt |
Port Orientation - Shaft End | Single Shaft Seal |
Spline Description | 12/24 |
Rotation | 2200 |
Cover End Flow @ RPM | 2200 |
Model No. | N/A |
Cover End RPM [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | 1.248 in |
Mounting Flange | 1.247 in |
Shaft Type | N/A |
Major Diameter [Min | N/A |
Cover End Pressure [Max | N/A |
Mounting | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | 4525VQ60A17-11BB20 |
Minor Diameter [Max | 3000 |
Integral Valve Configuration | 2500 |
Relief Valve Setting | 25.5 |
Seal Material | 90 |
Major Diameter [Max | w/o Integral Valves |
Port Orientation - Cover End | Outlet 45° CCW from Inlet |
Shaft End Pressure [Max | Outlet 90° CCW from Inlet |
Weight | 1 in Flange |
Shaft Key | 1 1/2 in Flange |
Displacement Shaft End (cu in/revolution) | 3.37 |
Shaft Dia. | 11.8 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-13569877658 |