CAT Excavator Diesel Engine Water Thermostat 247-7133
Port Type: | 45.0 LB |
Relief Valve Setting: | Flange Mount |
Spline Description: | Left Hand (CCW) |
Integral Valve Configuration: | 2520VQ17A14-11CC20-LH |
Shaft Seal Type: | 2.5 |
Cover End Pressure [Max: | Flange |
Controlled Flow Rate: | N/A |
Rotation: | Standard Pilot |
PDF |
|
Product Details
Port Type | 45.0 LB |
Relief Valve Setting | Flange Mount |
Spline Description | Left Hand (CCW) |
Integral Valve Configuration | 2520VQ17A14-11CC20-LH |
Shaft Seal Type | 2.5 |
Cover End Pressure [Max | Flange |
Controlled Flow Rate | N/A |
Rotation | Standard Pilot |
Port Size | 0.875 in |
Shaft End Flow @ RPM | 13 Tooth Splined |
Major Diameter [Max | 2520VQ |
Major Diameter [Min | 1.375 in |
Mounting | Double |
Pump Series | Buna-N |
Minor Diameter [Max | 2500 |
Weight | 0.715 in |
Cover End Flow @ RPM | SAE B, 2 Bolt |
GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
Shaft Dia. | 16/32 |
Mounting Flange | 2700 |
Port Orientation - Cover End | 2500 |
Displacement Shaft End (cu in/revolution) | 3.4 |
Cover End RPM [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Port Orientation - Shaft End | 0.873 in |
Manufacturer Part No. | 0.872 in |
Minor Diameter | N/A |
Pressure Port Size, Shaft End | N/A |
Shaft End Pressure [Max | N/A |
Pressure Port Size, Cover End | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Displacement Cover End (cu in/revolution) | 2520VQ17A14-11CC20-LH |
GPM @ 1,800 rpm, Shaft End | 2000 |
Shaft Length | 3000 |
Minor Diameter [Min | 21 |
Shaft End RPM [Max | 25.5 |
Model No. | w/o Integral Valves |
Pilot Type | Outlet 45° CW from Inlet |
Shaft Type | Outlet Inline w/Inlet |
Shaft Key | 3/4 in Flange |
Max. RPM [Max | 1 in Flange |
Seal Material | 2.8 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-13569877658 |